Our Staple system fits directly onto the insulation layer that is laid before a screed or concrete floor is installed. This is a more traditional method of installing underfloor floor heating into a solid/screeded floor.
Staple systems offer a cost-effective solution for screeded floors, simply use the staple gun to fix the pipe directly to the insulation boards.
- Features and benefits
- Key design information
- Minimum fixing materials needed
|Typical heat output at 50ºC mean water temperature||
76 W/m2 at 200mm pipe spacing
|Recommended design flow temperatures||
|Maximum circuit length||
|Maximum coverage per circuit||
12 m2 at 100mm centres 22 m2 at 200mm centres